WoCa Maintenance Paste

Maintenance Paste

for the re-freshening and maintenance of all oiled surfaces

Maintenance Paste is for the re-freshening and maintenance of oiled wood floors. The maintenance Paste is also especially suitable for UV-oiled floors.

Available in:
Maintenance Paste is available in 400 ml tubes in the colours natural and white.

Tools:
Polishing machine for the application with machine and doodlebug for manual application. Cotton cloths. Clean tools in Solvent.

How to do...

Before a new floor is taken into use it is recommended to buff it – both industrially oiled floors and on site oiled floors. The final buffing gives a hard-wearing surface and may take place either by hand or with machine. Oiled floors should be maintened regularly – normally once a year, but more often when it comes to floors exposed to extremely hard wear. The maintenance may be done locally.

1. Clean the floor with 125 ml Wood Cleaner mixed into 5 l water. Leave the floor to dry for at least 8 hours. The floor must be completely dry.

2. Apply thin coat of Maintenance Paste onto 1-2 m² floor at the time with white polishing pad or cotton cloth. Use floor machine for distribution of Maintenance Paste for large areas.

3. Make sure that the Maintenance Paste is polished uniformly into the wood. Buffing continues until wood appears saturated and silk-mat. Apply more paste if necessary.

4. If a very mat finish is required, make buffing with cotton cloths under polishing pad. Let surface rest for 4 hours. Do not expose floor to water for 48 hours after finishing.

Please notice:
Risk of self-ignition! Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.