WoCa No1 Wood Floor Lacquer

Wood Floor Lacquer

for the lacquer treatment of light-coloured, untreated wood types

The WOCA No1 Wood Floor Lacquer provides the wood with a breathable, silky smooth, self-matting and flexible finish. The Two-Component-Lacquer produces an unique soft-feel effect. The wood gets an completely natural, untreated appearance.

Available Pot Sizes:
The No1 Wood Floor Lacquer is available in the container sizes 2.5 and 5.0 liters and in the gloss level mat.

Tools:
Brush or lacquer roller

How to do...

1. As a two-component paint the No1 Wood Floor Lacquer is only activated by the addition of the No1 Hardener Mix the hardener and the lacquer in a ratio of 50 ml to 2.5 l thoroughly in the lacquer can. Leave the mixture for about 10 minutes in order to activate the hardener.

2. Clean the floor with an intensive cleaner and allow it to dry well.

3. Shake the lacquer canister well and apply the No1 Floor Lacuer with a brush or a roller.

4. Let the floor dry for about 90 minutes. Sand the floor again after about 12 hours and apply the lacquer again.

5. Repeat the procedure described under 4 again. After 8 days, the floor is ready for full use.

Note: The lacquer and the wood temperature should be at about 20° C.

Please notice:
Avoid contact with eyes and skin. Do not swallow and do not inhale.