WoCa High Solid Master Oil

High Solid Master Oil is ideal for the basic finish of wood surface indoors.

High Solid Master Oil

for the basic finish of wood floors with machine

High Solid Master Oil is ideal for the basic finish of lye primed, unfinished, new or freshly sanded wood surface indoors. It is suitable for all wood species including cork.

Available Pot Sizes:
High Solid Master Oil is available in the container sizes 2,5 and 5 litre containers and in the colours natural and white.

Tools:
A polishing machine with beige polishing pad. Paintroller and cotton cloths. Clean tools in Solvent.

oil wood floors

Quantities:
2,5 l or 5 l in natural, white and extra white

Coverage:
approx. 1 l per 15-20m²

Price:
Current recommended retail price

high-solid-masteroil können Sie online im WoCa Shop bestellen

Verarbeitung und Anwendung WoCa High Solid Master Oil High Solid Master Oil is ideal for the basic finish of wood surface indoors.

How to do...

Content of solvent is less than 9%. High Solid Master Oil should be applied only by polishing machine.

1. The unfinished woodwork should be freshly sanded with grit 100-120. Clean with 125 ml Wood Cleaner mixed with 5 l water. The floor must be completely dry and free from dirt and grease before the oil application. Recommended wood moisture max. 12%. The oiling is done at min. 18° C.

2. Shake oil container well before and during use. Apply the oil with a short-haired paintroller in an even coat onto approx. 10-15 m2 of floor. Leave the oil to be absorbed for 5-10 minutes. If dry spots appear, apply more oil.

3. Excess oil is removed or scraped onto next section of floor to be finished. The area is now polished with floor machine until the area appears saturated. The floor should not appear wet and there should not be any excess oil left on the surface after polishing. Continue in sections until the whole floor has been finished.

4. After 6-8 hours the floor should be buffed with white polishing pad. If a silk-mat surface is required, the finished floor may be buffed with 100ml High Solid Master Oil to 15 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor. The surface is fully hardened after 36-48 hours. Do not expose the floor to water during the hardening time.

Please notice:
Risk of self-ignition! Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.

XHTML konforme Programmierung CSS ist valide webdesign by info-art agentur für kommunikation

Seiten zum weitersurfen: unsere Webtipps

weiterführende Seiten zum Thema Laugen von Holz: Verarbeitung Trip Trap Lauge

Diese Webseite ist urheberrechtlich geschützt. Unerlaubte Verwendung wird verfolgt.

© by info-art agentur für kommunikation